首站-论文投稿智能助手
典型文献
Assessment of fracture process in forta and polypropylene fiber-reinforced concrete using experimental analysis and digital image correlation
文献摘要:
This paper aims to characterize the evolution of the fracture process and the cracking behavior in forta-ferro(FF)and polypropylene(PP)fiber-reinforced concrete under the uniaxial compressive loading using experimental analysis and digital image correlation(DIC)on the surface displacement.For this purpose,6 mix designs,including two FF volume fractions of 0.10%,and 0.20%and three PP volume fractions of 0.20%,0.30%,and 0.40%,in addition to a control mix were evaluated according to compressive strength,modulus of elasticity,toughness index,and stress-strain curves.The influence of fibers on the microstructural texture of specimens was analyzed by scanning electron microscope(SEM)imaging.Results show that FF fiber-reinforced concrete specimens demonstrated increased ductility and strength compared to PP fiber.DIC results revealed that the major crack and fracture appeared at the peak load of the control specimen due to brittleness and sudden gain of large lateral strain,while a gradual increase in micro-crack quantity at 75%of peak load was observed in the fiber specimens,which thenbegan to connect with each other up to the final fracture.The accuracy of the results supports DIC as a reliable alternative for the characterization of the fracture process in fiber-reinforced concrete.
文献关键词:
作者姓名:
Seyed Hamid KALALI;Hamid ESKANDARI-NADDAF;Seyed Ali EMAMIAN
作者机构:
Department of Civil Engineering,Hakim Sabzevari University,Sabzevar 9617976487,Iran
引用格式:
[1]Seyed Hamid KALALI;Hamid ESKANDARI-NADDAF;Seyed Ali EMAMIAN-.Assessment of fracture process in forta and polypropylene fiber-reinforced concrete using experimental analysis and digital image correlation)[J].结构与土木工程前沿,2022(12):1633-1652
A类:
forta,thenbegan
B类:
Assessment,fracture,process,polypropylene,reinforced,concrete,using,experimental,analysis,digital,image,correlation,This,paper,aims,characterize,evolution,cracking,behavior,ferro,FF,PP,under,uniaxial,compressive,loading,DIC,surface,displacement,For,this,purpose,mix,designs,including,two,volume,fractions,three,addition,control,were,evaluated,according,strength,modulus,elasticity,toughness,stress,strain,curves,influence,fibers,microstructural,texture,specimens,was,analyzed,by,scanning,electron,microscope,imaging,Results,show,that,demonstrated,increased,ductility,compared,results,revealed,major,appeared,peak,due,brittleness,sudden,gain,large,lateral,while,gradual,quantity,observed,which,connect,each,other,final,accuracy,supports,reliable,alternative,characterization
AB值:
0.522938
相似文献
Mechanical behaviours of sandstone containing intersecting fissures under uniaxial compression
Fei Xiong;Xinrong Liu;Xiaohan Zhou;Guangyi Lin;Dongshuang Liu;Yafeng Han;Bin Xu;Chunmei He;Zijuan Wang-School of Civil Engineering,Chongqing University,Chongqing,400045,China;State Key Laboratory of Coal Mine Disaster Dynamics and Control,Chongqing University,Chongqing,400044,China;National Joint Engineering Research Center of Geohazards Prevention in the Reservoir Areas,Chongqing University,Chongqing,400045,China;State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology,Xuzhou,221116,China;College of Architectural Engineering,Neijiang Normal University,Neijiang,641100,China;School of Management Science and Engineering,Chongqing Technology and Business University,Chongqing,400067,China
机标中图分类号,由域田数据科技根据网络公开资料自动分析生成,仅供学习研究参考。